EcoMarine G2
"EcoMarine G2 is a comprehensive solution that comes with three modules to help in fabrication. EcoMES is a software that enables the acquisition of 3D coordinates of fabricated objects. EcoBlock is a dimensional analysis software that checks for deviations between measured data and the 3D design model. Finally, EcoOTS is a simulation analysis software that checks for gaps, overlaps, and misalignments in more than two objects that will be joined.
EcoMES
Measurement
Analysis
EcoMES
Total Station based Measurement Software
Measurement
-
Acquire 3D coordinate
-
Acquire coordinate of the center of circle
-
Acquire a coordinate of a hidden point
-
Sync reference points before and after shifting Total Station position
-
Continuously measuring for Draft Marking in shipbuilding & offshore project
-
Pin point on a user defined(Design coordinate)point
-
Acquire As-Built coordinate against the design value
Analysis
-
Calculation (Length, Center of Circle, Circle Fit, Straightness, Flatness etc.)
-
Axis Translation
-
Point Move (1 Point, 2 Points and 3 Points)
-
Deviation of measuring point against the design
Connection/Data Transfer
-
Connection (PDA/Mobile Device-Total Station)
-
Connection by Bluetooth
-
Connection by Cable
-
Compatible with Sokkia,Topcon,Leica,Pantax Total Station
-
-
Data Transfer
-
Mobile Version: Transfer directly from mobile device (Within Network)
-
Connection of PDA to PC by PDA Cradle or PDA SnapOn
-
EcoBlock
3D based Dimensional Analysis
Visualization
-
Read different types of CAD file format (dxf, dgn, sat, cat, iges, igs, step, ifc etc. )
-
Dimension information check from 3D CAD model in easy way
-
Load multiple 3D CAD models in one project
Create Work Package
-
Generate a dimensional control work package(check sheet) using different views of 3D CAD model
-
Input dimensional information in the work package in easy way
Analysis
-
Automatically detect base points of checking deviation of measuring point against the design model
-
Automatically align measured data and design model based on the base points
-
Automatically analyze deviation of measuring points against the design model
-
Different features of dimensional analysis
-
Calculation (Length, curved length, center of circle, circle fit, straightness, flatness)
-
Axis translation
-
Point Move (1 Point, 2 Points and 3 Points based)
-
Create Report
-
Analysis results included "Work Package" utilize as a report
EcoOTS
Erection/Installation Simulation - First Time Fit
Loading Project File
-
Load the project file includes design models and measured data
Simulation Analysis
-
Analyze gap, overlaps, and misalignment of the "Erection Block" against the "Base Block"(Blocks placed in the final position)
-
Check values of cut/correct of erection block to achieve “First Time Fit”
-
Get the analyzed value based on the direction and path of erection
-
Control the entire length/width of ship/plant modules
-
Get the coordinate of optimal position of erection/installation
Create Report
-
Create a “Work Package” that includes information(where and how much to cut) on how to correct the erection block.
-
Reflects simulation results to "Work Package" automatically
-
Created "Work Package" can be used as Work Order sheet (Correcting errors before erection/installation)
EcoServer
Interlocking with 3D CAD System / Dimensional Control Data Server
-
Synchronization of 3D Model by interlocking with 3D CAD (AM, S3D, Tribon) System
-
Data management and sharing ; Measured Data, Design Model, Analysis Data, Work Package and Report
-
Using “Production Manager” software, enable to assign tasks and monitor all activities related to dimensional control
-
Take statistics (Total amount of cutting, out of tolerance rate, shrinkage rate) based on dimensional control data from the server using provided SDK.